System of numerical control of unifinication CASNUC 2100e applies mediumly in inclined shaft cylindrical grinder

Inclined shaft grinder can be ground namely outside round, also can trouble end panel. Use the circle outside take humeral cylinder at the industry grinding such as car, autocycle, compressor or aging the end panel of axle is mixed.

Jinan plant of the 4th machine tool is new the grinding machine that develops function of a kind of inclined shaft, choose the system of 2100eG numerical control of spaceflight numerical control, via debugging on-line, satisfy use requirement completely.

System of 2100eG numerical control can be used at cutting the cylindrical grinder, cylindrical grinder that takes inclined shaft function continuously, technical index is as follows:

(1) controls X axis, Z axis, main shaft.

(The cylindrical grinder of function of 2) inclined shaft can realize sheet to move, linkage function, inclined shaft angle can be between 80 ° of 0 ° ～ set.

(Function of 3) E parameter, have ＋ , - , ﹡ , / operation, judgement, jump turn function, readable take the treatment after current position uses coordinate of X, Z, axis at emery wheel nap.

(System of 4) numerical control can receive signal of probe of treating capacity appearance.

(5) returns a function urgently: When encountering emergency, can carry out automatically retreat urgently, avoid the happening of the accident.

(6) electromotor low speed is handled, most low speed is executable 0.001mm/min, highest scooter 100m/min.

Sheet moves: When mobile X axis, x axis is only mobile.

Linkage: When mobile X axis, z axis is mobile also, make X axis maintains as perpendicular as Z axis shift.

Program of emery wheel nap:

E80: X to parameter of emery wheel nap, in inputting data E parameter to knife hind

E81: Z to parameter of emery wheel nap

E80 12.941 of N01 E50 ＝ ;

E50-9.367 of N02 E51 ＝ ;

E50-10.975 of N05 E52 ＝ ;

E50-12.941 of N06 E53 ＝ ;

E81-50 of N10 E60 ＝ ;

N11 E61 ＝ E81-31.5;

N12 E62 ＝ E81-28.5;

E81-8 of N13 E63 ＝ ;

N18 M08;

N19 M50 linkage

E50 F3000 of N20 G01G90G94X ＝ ;

E60 F3000 of N12 G01G90G94Z ＝ ;

N14 X ＝ E51 F500;

E09 of ＝ of E61 F of N29 Z ＝ ;

E62 of ＝ of E52 Z of ＝ of N15 G01G90G94 X;

E63 of ＝ of N20 G01G90G94 Z;

N25 G02G91 X-1.966 Z0.983 R2;

E81 of ＝ of N21 G01G90G94 Z;

N22 G01G91G94 X-40;

N23 G01G91G94 Z5F3000;

E50 of ＝ of N24 G01G90G94 X;

E80-E82 of N25 E80 ＝ ;

E81-E83 of N26 E81 ＝ ;

N27 E10-E82;

N29 M99;

Work machine program:

E10: X machines pair of knife parameter to workpiece
Previous12 Next